EuroLam 3038 - Laminating Epoxy Tooling Resin
2 component system, EuroLam 3038 Part A epoxy resin
reacts with EuroCast 3038 Part B to form a tough, rigid
epoxy resin.
Mixing ratio by weight: 2:1
Applications EuroLam 3038 has been formulated for use as a laminating
resin with chopped glass mat and rovings for subsea
applications but also finds use in resin infusion and other
similar application methods. The low viscosity and long pot-life allow for thorough wetting
and penetration of the reinforcing medium.
The cured product shows excellent physical properties in
particular a high level of toughness and impact resistance.
Specification
Gel Time (100g 20°C): 4 Hours
Full Cure (100g 20°C): 5 Days
Colour: Part A Hazy White, Part B Brown, Mixed Pale-Brown
Specific Gravity: Part A 1.12, Part B 0.96, Mixed 1.15
Physical Properties
Hardness at full cure - no reinforcement (Shore D): 84
HDT: 110-140°C
Tensile Strength Tensile Modulus Flexural Strength Flexural Modulus Elongation at Break | With 32% Chopped Strand Mat 128 7,734 204 6093 2.3 | With 60% Woven Rovings
473 18,065 411 15,860 3.2 |
MPa MPa MPa MPa % |
